Interface
|
1 x Fast Ethernet RJ-45 (Support IEEE 802.3af PoE)
|
Button
|
Reset Power Jack
|
Antenna Type
|
Internal 5dBi MIMO
|
Memory
|
32MB
|
Flash
|
4MB
|
Mounting
|
Ceiling / Wall Mounting
|
Wireless Standard
|
802.11 b/g/n
|
Frequency
|
2.400~2.484 GHz
|
Signal Rate
|
- 11n: Up to 300Mbps(dynamic)
- 11g: Up to 54Mbps(dynamic)
- 11b: Up to 11Mbps(dynamic)
|
Reception Sensitivity
|
- 11n: ≤ -93 dBm
- 11g: ≤ -93 dBm
- 11b: ≤ -98 dBm
|
Modulation Technology
|
- OFDM : BPSK, QPSK, 16-QAM, 64-QAM
- DBPSK, DPQSK, CCK
|
Status
|
- System Information
System Up Time, Device Name, Wireless MAC, LAN MAC, Country, Current Time, Firmware Version
- Current IP Setting
IP Address, Subnet Mask, Default Gateway, DHCP, DNS
- Current Wireless Setting
Operation Mode, Wireless Mode, Channel/Frequency, L2 Isolation, MSSID Setting
- Client List
List current associated clients Show only authorized and associated clients
- System Log
Displays a list of events triggered
|
Function
|
- Operation Mode
Access Point
- WDS Detail
WDS, WDS AP algorithm, WDS Bridge algorithm
- Channel Setting
802.11b/g/n, Manual, Auto/Best Channel Selection
- Transfer rate setting
Auto and Manual
- Output Power Control
Select by dBm
- Power Saving
Wireless LAN power saving
- Multi BSSID (Multi AP)
4 x BSSID for 2.4GHz (Each BSSID should has its own WiFi & Security settings)
- WPS Security (Software Only)
- WEP (64/128bit) - WPA/WPA2 TKIP/AES - Mac address filtering (WLAN, up to 32 field) - 802.1x Authenticator MD5/TLS/TTLS, PEAP - 802.1x Supplicant TTLS, PEAP
- LAN Setting
- IP (check validity and DHCP server IP range) - MAC
- DHCP Server
DHCP Range, Lease Time, Client List
- VLAN
- VLAN tag on MSSID - Management VLAN Ethernet port VID (Only allow user with specified VID to access the device) - Independent VLAN setting can be enable or disable - Any packet that enters the device without VLAN tag will have a VLAN tag inserted with a PVID (Ethernet Port VID)
- SNMP
- SNMP V1/V2C MIBI, MIBII -- SNMP Active : Disbaled/Enabled -- SNMP Version : V1/V2c/ALL - Private MIB -- Read Community -- Set Community -- System Location -- System Contract -- Trap Active : Disabled/Enabled -- Trap Manager IP
- Administration
- User name (set as "admin") - Password (can be changed by user) - Confirmed Password
- Backup/Restore Setting
- Save current setting - Restore saved setting - Reset to factory default
- Firmware Upgrade
Allow user to decide to keep current setting or reset to default
- Diagnosis
Address to Ping
|
Wireless Security
|
- Captive Portal Authentication
- Access Control
- Wireless Mac Address Filtering
- Wireless Isolation Between Clients
- SSID to VLAN Mapping
- Rogue AP Detection
- 802.1X Support
- 64/128/152-bit WEP / WPA / WPA2-Enterprise,WPA-PSK / WPA2-PSK
|
Wireless Setting
|
- Operation Mode - AP/WDS
- Wireless Mode - 11b/g/n
- Channel Selection
- Channel Bandwidth (Auto, 20Mhz, 40Mhz)
- Transmission Rate - 11n only, 11b/g/n mix, 11b only, 11b/g
|
System Requirements
|
- Microsoft Windows 10/8/7/98/ME/NT/XP/2000
- Mac OS X (10.4)
- Web Based (HTTP 1.0/1.1)
- Microsoft IE 6.0 or above
- Firefox 2.0 or above
|
Environment
|
- Operating Temperature: 0℃~50℃
- Storage Temperature: -20℃~60℃
- Operating Humidity: 90% or less
- Storage Humidity: 90% or less
|
Power Supply
|
12V / 1A
|
Dimension (WxH)
|
120 x 50 mm
|